OpenWRT 实现HP1020打印机网络共享

1、下载HP1020固件文件sihp1020.dl文件至/etc目录

2、在USB热拔插触发目录下建立触发脚本：VI /etc/hotplug.d/usb/Printer-HP1020

#!/bin/sh set -e # 固件路径 FIRMWARE=/etc/sihp1020.dl # 打印机路径，可以从OpenWRT的USB打印机界面中中查看 DEVICE=/dev/usb/lp0 # Debug Log File LOGFILE=/tmp/hp1020 if [ "$PRODUCT" = "3f0/2b17/100" -a "$ACTION" = "bind" -a "$DEVTYPE" = "usb_device" ]; then echo "$(date): USB printer binded. Trying to upload firmware..." >> $LOGFILE cat $FIRMWARE > $DEVICE echo "$(date): Success. Done." >> $LOGFILE exit fi

加入首次启动 local startup /etc/rc.local

cat /etc/sihp1020.dl >> /dev/usb/lp0

3、实现效果：

打印机开机后触发USB热插拔事件，HP1020打印机绿灯常亮并立即进行自检，然后红灯绿灯交替闪烁再次自检，随后绿灯常亮

出处： https://www.pizzayy.com/openwrt-实现hp1020打印机网络共享.html?doing_wp_cron=1714973122.5799219608306884765625

作者： suhaha

su haha

《OpenWRT 实现HP1020打印机网络共享》有一个想法

  1. 新系统不需要这么复杂了。仅需在config里指定驱动路径。
    root@OpenWrt:~# cat /etc/config/p910nd
    config p910nd
    option device ‘/dev/usb/lp0’
    option port ‘0’
    option enabled ‘1’
    option runas_root ‘1’
    option usbvidpid ’03f0/2b17′
    option mdns_sn ‘S420WCB’
    #option driver_file ‘/opt/p910nd_drivers/Hewlett-Packard_HP_LaserJet_1020_03f0_2b17.bin’
    option driver_file ‘/etc/config/sihp1020.dl’
    option mdns_cls ‘PRINTER’
    option mdns_mfg ‘Hewlett-Packard’
    option mdns_note ‘Located near router’
    option mdns ‘1’
    option mdns_mdl ‘HP LaserJet 1020’
    option mdns_cmd ‘ACL’
    option mdns_ty ‘HP LaserJet 1020’
    option mdns_product ‘(HP LaserJet 1020)’
    option bidirectional ‘1’

    config hotplug
    option driver_home ‘/opt/p910nd_drivers’

发表回复